| |
| Wood Grain Project #1: (2002 Cadillac Deville Clarion
Double Din) |
| PAGE 1 |
|
|
| |
Step 1: |
|
 |
| |
Here is the basic Cadillac Deville,
Seville, Eldorado aftermarket installation kit.
Notice that it is only designed to hold a single
din stereo. |
|
|
|
| |
|
|
| |
Step 2: |
|
|
| |
Using a hacksaw blade, cut off the
lower pocket of the kit. |
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
| |
Here is the reverse side to show what
the kit looks like without the lower pocket. |
|
|
|
| |
|
|
| |
|
|
|
| |
Another angle at the reverse side
of the installation kit. |
|
|
|
| |
|
|
| |
Step 3: |
|
|
| |
The double din unit is 4 inches high.
Using a measuring tape, measure 4 inches from the
top of the inner bezel. Then mark it with a pencil
and draw a straight line so you can cut that piece
off. Cut along the line you made with a box cutter
(razor blade) to get a fine cut. Using a hacksaw
blade here will not give you the precision that
is needed. Note: Do not cut all the way to the end,
only to where the side bezel starts. |
|
|
|
| |
| Next Page |
